An Double Glazed Window Repair Success Story You'll Never Imagine

Double Glazed Window Repair

Double glazing is an excellent investment in energy efficiency. It helps prevent loss of heat in the winter months and helps keep your home cool during summer. Repairing your double-glazed windows whenever necessary is a great way to keep them in good working order.

Over time condensation and misting could affect your double-glazed windows. This could cause your double glazed windows to be difficult to open or close.

Broken Panes

A rogue baseball or a flying pebble from your lawnmower, or even a storm that is heavy can shatter the double panes of your windows, leaving your home exposed to the elements. Even though a glass window that has been damaged isn't easy to fix, it doesn't need to be replaced. The insulated glass that is between two panes of glass is still in good shape and you can fix your double-paned window on your own.

To begin, you'll need take the broken glass out of the frame. You'll need to be cautious to prevent glass shards from falling onto the floor or sliding out of the frame. Make sure to wear a pair of work gloves to protect your hands, and a rag to protect the area surrounding the broken glass to avoid further breakage or cuts. After removing the broken glass, carefully clean the entire frame of the window to remove any sealant residue and debris. It is essential to sand rough areas of your frame to create an even surface for your new glass.

After cleaning the frame, you can apply a new layer of glass to the place where the damaged pane was removed. This is the best way to ensure your window stays safe and sealed and will save you money by stopping drafts and water from entering the house. The next step is to select the material for your glazing. There are a variety of options including clear tape which is more durable than regular tape, and can prevent further cracking of your window, or glazing film, which is similar to clear plastic wrapping. This choice has the benefit that it can be painted to match your frame and will also block out rain and ice.

Whatever material you decide to use it's essential to press the glazier's points into that seam where the putty meets your frame. These will hold the newly-formed glass in place and aid it adhere to the frame. The glazier's point can be found in hardware stores, and they are available in pre-made ropes which you roll out onto the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues and if you experience this issue, it is best to contact the company that supplied the window. Many companies offer warranties and guarantees to provide coverage for the issues. Fogging or condensation between the panes of your windows is a sign that your seals aren't working properly. Only a professional can fix this problem by replacing both panes.

It is a tricky process that requires special tools to remove and replace the window. A professional can complete this task and provide the equipment. It is best to delegate the work to a professional. These tools can be hazardous.

Wear safety gloves and glasses if opt to do it yourself. You could be exposed to glass fragments flying around. It is crucial to take out any putty or metal glazing points from the grooves that will hold the new window. You should also wire-brush the frame and vacuum or wipe it with a damp cloth. After the frame has glazing repairs dried you'll have to purchase a replacement piece of glass that is 1/8" shorter in both directions than your existing window. Test-fit the glass into the grooves.

You will need to apply a layer silicone caulk to the grooves of your frames to ensure that the glass you are installing is secure in its installation. Once the caulk has dried and is dry, you must smooth it out and make any needed adjustments. The wood molding can be put back in place.

Double glazed windows can be difficult to open and close if the weather changes dramatically. Extreme temperatures can cause frames to expand or shrink and this can make them slide or become stuck. If this is the problem you could try wiping down the frames with water and lubricating the joints. However, it may be a good idea to call the company that installed your windows to help.

Misted

Misted Double Glazing is a problem with windows that occurs when moisture gets trapped between the glass panes of your double glazed windows. Double glazing consists of two panes that are separated by a gap filled with argon to improve thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside, allowing you to keep the temperature in your home comfortable.

The seal may be damaged over time, and moisture may build up between the glass panes, causing them to appear misty. This happens because the sun's heat causes the gap between panes of windows, causing water to evaporate.

This is a normal thing to happen but if it happens between the window panes, it can be a problem since it can no longer regulate the temperature of the room, and allows the outside temperature to affect the indoor temperature. If you notice your double-glazed windows have become blurred, call the experts at Northfield Glass to investigate.

We can replace a single sealed unit without needing to replace the entire window. This is far less disruptive than a full replacement. Our misty glass repair involves taking off and cleaning the unit of glass before replacing it with a brand new one. This will result in a watertight seal and will be watertight.

There are some companies in the field that claim to cut holes into your windows that are misting and inject chemicals into them, which claim to eliminate fog & condensation however, we don't recommend this method. This method isn't just unsightly but could also damage the toughened glass, leaving you with a window that doesn't function properly.

If you don't fix the problem immediately, it could lead to mould, which could not only cause damage to the window, but could also risk health issues for your family members. The moisture in the window may cause other issues within your home, such as damp or rot. In some instances it is possible to replace the entire window.

Failed or Blown

Double-glazed windows are comprised of two panes of glass with an inert or air between them. This helps to improve their thermal efficiency, keeping heat in and cold out. Over time the gas will become depressurised and cause various problems.

Condensation between the panes is one of the most common. It's not a sign of a failure in the window, but it could be a sign that you need to reseal them. Condensation could be an indication that your double glazing is damaged, in which case it should be replaced completely.

Also, look out for draughts coming from the double-glazed windows. It could be due to an unsound seal, a broken handle, or a broken lock. A draught can be quite noticeable and will lead to higher heating costs, so it is important to get it fixed sooner rather than later. You can test the seals by rubbing around the edges of your window frame to see if you feel any cold air.

You may also see water beads on the inside of windows if the window seals aren't working. This is an indication that you need to replace the seals on your double-glazed windows.

The frames of your windows are designed to move a bit, as they need to do to keep the glass sheets in the right place. However, over time this particular packaging material will get compacted, and this could cause the seal to break. This allows air to move between the panes, reducing the efficiency of your window's energy consumption.

A blown seal is an obvious sign that your double glazing is damaged and needs to be fixed immediately. A damaged seal can stop your double glazing from performing its primary purpose, which is to keep cold air out and warm air in. A blown seal could let moisture in your home, which could lead to mold and other unpleasant conditions. You should call a double glazing repair specialist when you notice a blown seal on your double-glazed windows, since they could replace the whole unit.